You cannot print correctly in NDS Print Server mode or NDS
Remote Printer mode under Windows 95 or Windows 98.
Cause
You may not be able to print
correctly under the following
conditions:
When using an
NDS queue in
Windows 95 (version
OSR 2.1, with USB
support) or Windows
98.
When using the printers
listed below:
EPSON Stylus COLOR
800/850/1520/3000,
EPSON Stylus 1500,
EPSON Stylus Pro 5000
NetWare environment
Nothing prints even though NetWare clients completed sending
the data to the printer.
Cause
Clients may not be registered,
or the Ethernet card may not
be logged in to the NetWare
server.
What to do
Open the target printer's properties
dialog box. Click Capture Printer
Port in the Details menu. Select LPT
port for the Device name and
\\(server name)\(print queue
name) for the Path name, then click
OK.
What to do
Make sure clients are registered users
of the print queue and the print
server. Also, make sure the Ethernet
card is logged in to the NetWare
server. If you need more information
about Print Server mode or Remote
Printer mode, see Chapter 4 or your
NetWare manual.
Troubleshooting 12-5