Macintosh Environment - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

You are likely to be charged for the line connection depending on
the number of hops you set.
Cause
You haven't set a small
number for the hops.
EPSON Net!2 will not start correctly.
Cause
Microsoft NetWare Directory
Service is installed in your
computer.

Macintosh environment

Printers do not appear in the Chooser.
Cause
EtherTalk is not selected in
the Network control panel or
in the AppleTalk control
panel.
12-6 Troubleshooting
What to do
Set hops carefully to prevent a charge
for the line connection and to keep
network traffic to a minimum.
What to do
If you are using NDS service, use
Novell NetWare Client32.
What to do
For models without Open
Transport:
Make sure to select EtherTalk
in the Network control panel.
For models with Open
Transport:
Make sure to select EtherTalk
in the AppleTalk control panel,
and make sure AppleTalk is
active in the Chooser. Also,
check the network equipment
including the hub and cables.