Overall Steps - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Overall steps
Follow these basic steps to set up and use the Ethernet card with
Macintosh systems. Go to the indicated chapters for more
information.
1.
Install the correct printer driver in your Macintosh system.
2.
Make AppleTalk active in the Chooser.
3.
Install EPSON Net!2 for Macintosh. See Chapter 2.
4.
If you plan to configure the card using the card's home page,
make the TCP/IP settings using EPSON Net!2. See Chapter 3.
5.
Make the AppleTalk settings using EPSON Net!2 for Macintosh
or the card's home page. See this chapter.
Note:
Do not use EPSON Namer with the Ethernet card.
5-2 Using the Ethernet Card with Macintosh
Advertisement
Table of Contents
Need help?
Do you have a question about the C823642 - Enet Print Server Type B Multi Protocol 10/100BTX and is the answer not in the manual?
Questions and answers