Note:
When using TCP/IP, EPSON Net!2 shows the Ethernet card information
for the same segment by default. To see the Ethernet card information for the
other segments, see "Getting information about other network segments"
on page 3-13.
Here is an example of setting the IP address using EPSON Net!2,
running under Windows 95 or Windows 98:
1.
Make sure Windows is running, the Ethernet card is connected
to the network, and the printer is turned on.
2.
Click Start, point to Programs, point to EPSON Net!2, then click
EPSON Net!2.
3.
Click the printer where you want to set the IP address, and then
click the Configuration button.
click here
Setting the IP Address 3-11