Setting Up For Sco Unix 4.2 Or Later (Open Server) - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Setting up for SCO UNIX 4.2 or later (Open Server)
In the following steps, substitute the name you will use to configure
your printer's Ethernet card on the network for HOSTNAME.
Substitute the printer name that users will send print jobs to for
Rprinter.
1.
Add the IP address and host name to the /etc/hosts file.
For example:
22.33.44.55 HOSTNAME
2.
Execute rlpconf to register the printer.
For example:
rlpconf
3.
Enter the name of the printer.
For example:
Please enter the printer name (q to quit):RPrinter
4.
Specify the remote printer as the printer type.
For example:
Is Rprinter a remote printer or a local printer (r/l)? r
5.
Enter the name of the remote printer's host.
For example:
Please enter the name of the remote host that Rprinter
is attached to:
HOSTNAME
Printer RPrinter is connected to host HOSTNAME
6.
Confirm that the entries are correct.
For example:
Is this correct?(y/n)y
9-6 Using the Ethernet Card with UNIX
Advertisement
Table of Contents
