Installing Epson Net!2; Installing Epson Net!2 For Windows; For Windows 95, Windows 98, And Windows Nt 4.0; Chapter 2 Installing Epson - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Type b ethernet interface card
Hide thumbs Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
Table of Contents

Advertisement

Chapter 2

Installing EPSON Net!2

You can configure the Ethernet card for TCP/IP, NetWare, or
AppleTalk using EPSON Net!2. By setting the IP address for the
Ethernet card, you can configure the Ethernet card using the card's
internal home page on an Internet browser. See page 3-14 for details.

Installing EPSON Net!2 for Windows

Follow these steps to install EPSON Net!2 for your operating system.

For Windows 95, Windows 98, and Windows NT 4.0

Before you install EPSON Net!2, make sure you have already
installed any network protocols that are used to communicate with
the Ethernet card. If you haven't already installed TCP/IP or
NetBEUI, see Chapter 3 for installing TCP/IP protocols or Chapters
6 or 7 for installing NetBEUI before continuing.
1.
Insert the Ethernet card software CD-ROM in the CD-ROM drive.
2.
The installation program starts automatically. If the screen
does not appear, choose Run from the Start menu.
Type D:\EPSETUP (where D is your CD-ROM drive) and click
OK.
Installing EPSON Net!2 2-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

C82362C82363C82364

Table of Contents