Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 100
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
6.
Type the NetBIOS name (up to 15 characters), the workgroup
name (up to 15 characters), and the device name (up to 8
characters).
Note:
The NetBIOS name is the name of your computer on the network.
Make sure to give the printer a unique name for the network.
For the workgroup name, type the domain name or the workgroup
name used in the Windows network.
Click SUBMIT to update the settings. If you have set a password,
7.
type the password to update the settings when prompted. See
Chapter 10 for more information about passwords.
8.
If the message "Configuration change is complete!" appears on
your screen, the update is complete. Enable the changes by
pressing RESET or turning your printer off and on.
6-6 Using the Ethernet Card with Windows 95 and Windows 98
Advertisement
Table of Contents
