Changing The Ip Address Using The Ethernet Card Home Page - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Changing the IP Address Using the Ethernet Card
Home Page
After you have configured the Ethernet card for TCP/IP using
EPSON Net!2 for Windows/Macintosh or the arp command, you can
make changes to the IP address or other settings using the Ethernet
card home page.
c
Caution:
You can't use EPSON Net!2 for Windows/ Macintosh and the
Ethernet card home page at the same time.
Once you make changes to the Ethernet card using the home page,
wait until the process is complete (the indicator lights stop
flashing) before turning off the printer or sending data to the
printer.
Note:
See "Setting the IP Address Using EPSON Net!2 for Windows/
Macintosh" on page 3-10 for the cautions and notes for each step.
There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS
documentation.
Follow the steps below to make changes to the IP address using the
Ethernet card home page.
1. Click the printer you want to configure from the list in the EPSON
Net!2 dialog box and click the Launch Browser button. EPSON
Net!2 closes automatically.
Or, launch your browser, and type the IP address of the Ethernet
card directly. Make sure EPSON Net!2 for Windows/Macintosh
is closed before launching your browser.
Type the following URL:
http:// <the IP address of the Ethernet card> /
The card home page appears.
3-14 Setting the IP Address