Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 43
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
2.
Click TCP/IP under Network on the Configuration menu to view
the TCP/IP setting screen.
3.
Under Get IP Address, select from the following: Manual, RARP,
BOOTP, or DHCP.
4.
Type the IP address, the subnet mask, and the default gateway.
5.
Click the SUBMIT button to update the settings. If you have set
the password, type the password to update the settings when you
are prompted.
6.
If the message "Configuration change is complete!" appears on
your screen, the update is complete. Enable the changes by
clicking RESET or turning your printer off and then on.
Setting the IP Address 3-15
Advertisement
Table of Contents
