Chapter 4
Using the Ethernet Card with NetWare
This chapter explains how to configure the Ethernet card for use in a
NetWare environment, and how to configure the card to operate in
either Print Server or Remote Printer mode.
Overview
Applicable systems
Server environments
NetWare 3.1/3.11/3.12 (Bindery)
NetWare 4.1/4.11 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
Client environments
The client environment must be supported by NetWare.
If necessary, you can print with the Ethernet card's internal
driver.
Overall steps
Follow these steps for configuring the Ethernet card for use with
NetWare. Go to the indicated chapters for more information.
1.
Log in as supervisor or admin.
2.
Install EPSON Net!2. See Chapter 2.
3.
Set the IP address. See Chapter 3.
4.
Set up the printer environment using NetWare PCONSOLE or
Nwadmin.
Using the Ethernet Card with NetWare 4-1