Installing Netbeui In Windows Nt 4.0; Configuring The Ethernet Card For Netbeui Using The Ethernet Card Home Page - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Installing NetBEUI in Windows NT 4.0
1.
Double-click the Network icon in the Control Panel. Click
the Protocols tab, and check if the NetBEUI Protocol is in the
Network Protocols list.
2.
If NetBEUI Protocol is not in the list, click Add. Select NetBEUI
Protocol and click OK.
Configuring the Ethernet card for NetBEUI using the
Ethernet card home page
You can configure the Ethernet card for NetBEUI using the Ethernet
card home page.
c
Caution:
You cannot use EPSON Net!2 for Windows and EPSON Net!2
for Intranet at the same time.
Once you make changes to the Ethernet card using EPSON
Net!2, wait until it registers the settings before turning off or
sending data to the printer.
7-8 Using the Ethernet Card with Windows NT
Advertisement
Table of Contents
