Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 139

IP Address Configuration settings
Items
IP Address Setting
IP Address
Subnet Mask
Default Gateway
AppleTalk Configuration settings
Items
Printer Name
Entity Type
Zone Name
Network Number
Set
Network Number
for Manual Mode
Return to Default
Cancel
Send
Using EPSON Net!2 and the Ethernet Card Home Page 10-11
Explanations
Select the method of acquiring an IP address from
the following: Manual, RARP, BOOTP, or DHCP.
Set the IP address for the Ethernet card.
Set the subnet mask of the IP address.
Set the gateway.
Explanations
Shows the name of the printer with the interface
card.
Shows the Entity type of the printer attached with
the interface card.
Select an AppleTalk zone.
Specify the setting method for the AppleTalk
network number.
Type the network number.
Resets all configuration settings of the Ethernet
card to the default settings. This is the same as
initializing the Ethernet card.
Cancels the changes and returns to the EPSON
Net!2 dialog box.
Sends the settings for the Ethernet card to the
printer.