Problems Using Epson Status Monitor 2 - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Problems Using EPSON Status Monitor 2

The Current Status menu shows the message
"A communication error has occurred."
Cause
The printer is turned off.
The printer is running the self
test or initializing itself.
Multiple computers are
monitoring a single printer,
and the printer cannot reply
to all of them at the same time.
The printer is not ready to
print.
What to do
Make sure that the power cord is
properly plugged into the electrical
outlet. Turn on the printer.
Turn off the printer to terminate the
self test, and then turn it on again.
Allow the printer enough time to
finish initialization.
Decrease the number of monitoring
computers or make the monitoring
interval longer in the Monitoring
Preferences dialog box. See "Setting
monitoring preferences" on
page 11-23 and "Tips for Using
EPSON Status Monitor 2" on
page 11-31.
Make sure the printer is ready to
print. For details, see your printer
documentation.
Troubleshooting 12-7