Configuring The Ethernet Card For Appletalk Using The Ethernet Card Home Page - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Configuring the Ethernet Card for AppleTalk Using
the Ethernet Card Home Page
You can configure the Ethernet card using the card home page and
an Internet browser.
c
Caution:
You cannot use EPSON Net!2 for Macintosh and configure the
card using the home page at the same time.
Once you make changes to the Ethernet card using the home page,
wait until the process is complete (the indicator lights stop
flashing) before turning off the printer or sending data to the
printer.
Note:
If you have not assigned an IP address to the card or if you use the
default setting (included when you select DHCP to acquire an
IP address) with EPSON Net!2 for Macintosh, you cannot set the
IP address for the Ethernet card using the card's home page.
See the previous section "Configuring the Ethernet Card Using
EPSON Net!2 for Macintosh" for the cautions and notes for each step.
There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS documentation.
1. Run EPSON Net!2. Click the printer you want to configure from
the list, and click the Launch Browser button. EPSON Net!2
closes automatically.
Or, run the browser and type the IP address for the Ethernet card.
Do not run EPSON Net!2 while the browser is running.
Type the following URL:
http:// (IP address of the Ethernet card) /
The home page appears.
5-6 Using the Ethernet Card with Macintosh