Using The Net Use Command To See The Ethernet Card - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Using the NET USE command to see the Ethernet card
When you are using Windows NT Server and using NetBEUI to
connect to the Ethernet card, we recommend that you use the NET
USE command, as outlined below:
1.
Double-click Network in the Control Panel and check that the
following services are installed.
For Windows NT 4.0:
Check that Server or Workstation is listed in the Services menu.
For Windows NT 3.51:
Check that Server or Workstation is listed in the Installed
Network Software list.
2.
Open the command prompt of Windows NT and type in the
following command.
NET USE (printer port): \\(NetBIOS name of the Ethernet
card)\(Device name of the Ethernet card)
7-12 Using the Ethernet Card with Windows NT
Advertisement
Table of Contents
