9.
Select Yes and click Finish to restart Windows when you
see the following screen.
Selecting a Printer to Monitor
Before you can start monitoring a TCP/IP or LPR printer with EPSON
Status Monitor 2, you need to select the printer in your operating
system. For Windows 95 and Windows 98, see the following section.
For Windows NT, see Chapter 7.
Note:
A printer will only appear if the Ethernet card's IP address is set.
For instructions on installing the card, see Chapter 1. For instructions on
setting the IP address for the card, see Chapter 3.
Windows 95 and Windows 98
Note:
The EPSON TCP/IP Printing setting must be set to Yes for Windows 95.
1.
Double-click the Network Neighborhood icon on your desktop.
EPSON Status Monitor 2 (Windows Only) 11-7