4. Click the NetWare Basic tab and make the following settings.
Frame type:
Select one from the following: Auto, Ethernet 802.2,
Ethernet 802.3, Ethernet II, or Ethernet SNAP.
Mode:
Select Remote Printer.
NDS:
Select Enable or Disable.
NDS Tree Name:
If you are using NDS mode, type the same name (up to 31
characters) as you set in Nwadmin.
NDS Context:
NDS context is the Object rank in the Directory tree. Type the
container object (up to 255 characters) from the Object to the
Root. Do not type the "." at the top.
Note:
See your NetWare manual for the available characters and number of
characters you can use.
Using the Ethernet Card with NetWare 4-33