Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 35
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
3.
If you continue installing the TCP/IP protocol, the TCP/IP
Configuration dialog box appears, and you can set the IP address.
(Ask your network administrator for your IP address.)
Note:
NT 3.51
To check the IP addresses which have already been assigned, select
TCP/IP Protocol in the Network Settings dialog box. Click the
Configure button to open the TCP/IP Configuration dialog box.
NT 4.0
To check the IP addresses which have already been assigned, click
the Protocols tab in the Network dialog box, select TCP/IP
Protocol, and then click the Properties button.
4.
When the installation is complete, check items such as the IP
address to make sure they have been entered correctly.
Setting the IP Address 3-7
Advertisement
Table of Contents
