Table of Contents
Advertisement
On the Advanced tab of the
Local Area Connection
Properties dialog box, the
Internet Connection Firewall
setting is on.
Macintosh environment
Devices do not appear in Chooser.
Cause
You may have selected a
wrong one for "Connect via"
in the AppleTalk Control
Panel.
The Rendezvous printer setting is overwritten by the
AppleTalk printer setting when the same printer is set up with
AppleTalk after the printer is set up with Rendezvous.
Change the AppleTalk printer name so that it does not conflict with the
Rendezvous printer name.
NetWare environment
Nothing prints even though clients have sent data to the device.
In the EPSON Scan Setting dialog box,
click the Add button. In the Add dialog
box, select the Enter address radio
button and then enter the IP address.
What to do
Make sure to select Built-in Ethernet or
AirMac in AppleTalk Control Panel, and
make sure AppleTalk is active in
Chooser. Also, check the network
equipment including the hub cable.
273
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers
my rx620 epson printer will not print any thing on the paper but the fist 3 cartridges are down to half full and the other 3 are close and i dont know where all the ink is going . the printer as working fine then just stopped printing goes through all the motions like it is