Setting Up For Sunsoft Solaris 2.4 Or Later - Epson 802.11g Reference Manual

Setting up for SunSoft Solaris 2.4 or later

In the following steps, substitute the name that your device will
be known by for HOSTNAME, and the name by which you want
your device to be known for Rprinter.
1. Add the IP address and printer host name to the \etc\hosts
file.
For example:
22.33.44.55 HOSTNAME
2. Define the host name as a print server.
For example:
lpsystem -t bsd HOSTNAME
3. Create the printer.
For example:
lpadmin -p Rprinter -s HOSTNAME\aux-T unknown-1
any
4. Enable the device for use.
For example:
accept Rprinter
enable Rprinter
5. To print, use the lp command.
For example:
lp -d RPrinter Print-File-Name
249