Table of Contents
Advertisement
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Editing PCs or Devices in the Network Database
To edit PCs or devices manually in the Network Database:
1. In the Known PCs and Devices table of the LAN Groups screen (see
click the Edit table button of a table entry. The Edit Groups and Hosts screen displays (see
Figure
4-6, which contains some examples).
Figure 4-6
2. In the Edit Known PC and Device section, specify the fields and make selections from the
pull-down menus as explained in
the Network Database" on page
3. Click Apply to save your settings in the Known PCs and Devices table.
Changing Group Names in the Network Database
By default, the groups are named Group1 through Group8. You can rename these group names to
be more descriptive, such as GlobalMarketing and GlobalSales.
To edit the names of any of the eight available groups:
1. Select Network Config > LAN Settings from the menu. The LAN Settings submenu tabs
appear, with the LAN Setup screen in view.
2. Click the LAN Groups submenu tab. The LAN Groups screen displays (see
page
4-14, which shows some examples in the Known PCs and Devices table).
4-16
step 1
of the previous section
4-15).
v1.0, January 2010
Figure 4-5 on page
("Adding PCs or Devices to
Figure 4-5 on
LAN Configuration
4-14),
Advertisement
Table of Contents
Troubleshooting
