Table of Contents
Advertisement
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Table 2-2. Setup Wizard Step 2: WAN Settings (continued)
Setting
Use These DNS
Servers
Setup Wizard Step 3 of 10: System Date and Time
Figure 2-9
Enter the settings as explained in
screen.
Note: After you have completed the steps in the Setup Wizard, you can make changes to
the date and time by selecting Administration > System Date & Time. For more
information about these settings, see
page
10-24.
2-14
Description (or Subfield and Description)
If your ISP has assigned DNS addresses, select the Use these DNS Servers radio
button. Ensure that you fill in valid DNS server IP addresses in the fields. Incorrect
DNS entries might cause connectivity issues.
Primary DNS Server
The IP address of the primary DNS server.
Secondary DNS Serve The IP address of the secondary DNS server.
Table 2-3 on page
Using the Setup Wizard to Provision the UTM in Your Network
v1.0, January 2010
2-15, then click Next to go the following
"Configuring Date and Time Service" on
Advertisement
Table of Contents
Troubleshooting
