NETGEAR UTM5EW-100NAS Appliance Reference Manual page 135

2. Enter the settings as explained in
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.
LAN DMZ Inbound Services Rules
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is allowed.
To create a new inbound LAN DMZ service rule:
1. In the LAN DMZ Rules screen, click the Add table button under the Inbound Services table.
The Add LAN DMZ Inbound Service screen displays.
Figure 5-10
2. Enter the settings as explained in
3. Click Apply to save your changes. The new rule is now added to the Inbound Services table.
Firewall Protection
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Table 5-2 on page
Table 5-3 on page
v1.0, January 2010
5-5.
5-8.
5-21