Table of Contents
Advertisement
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Figure 5-18
3. Select the Enable SIP checkbox.
4. Click Apply to save your settings.
Creating Services, QoS Profiles, and Bandwidth Profiles
When you create inbound and outbound firewall rules, you use firewall objects such as services,
QoS profiles, bandwidth profiles, and schedules to narrow down the firewall rules:
•
Services. A service narrows down the firewall rule to an application and a port number. For
information about adding services, see
•
QoS profiles. A quality of service (QoS) profile defines the relative priority of an IP packet
for traffic that matches the firewall rule. For information about creating QoS profiles, see
"Creating Quality of Service (QoS) Profiles" on page
•
Bandwidth Profiles. A bandwidth profile allocates and limits traffic bandwidth for the LAN
users to which a firewall rule is applied. For information about creating bandwidth profiles,
see
"Creating Bandwidth Profiles" on page
Note: A schedule narrows down the period during which a firewall rule is applied. For
information about specifying schedules, see
Specific Traffic" on page
Adding Customized Services
Services are functions performed by server computers at the request of client computers. You can
configure up to 125 custom services.
5-32
"Adding Customized Services" on page
5-35.
5-38.
"Setting a Schedule to Block or Allow
5-41.
v1.0, January 2010
5-32.
Firewall Protection
Advertisement
Table of Contents
Troubleshooting
