NETGEAR UTM5EW-100NAS Appliance Reference Manual page 378

ProSecure Unified Threat Management (UTM) Appliance Reference Manual
To clear the statistics, click Clear Statistics.
To set the poll interval:
1. Click the Stop button.
2. From the Poll Interval pull-down menu, select a new interval (the minimum is 5 seconds, the
maximum is 5 minutes).
3. Click the Set Interval button.
Table 11-6 explains the fields of the Total Threats, Threats (Counts), and Total Traffic (Bytes)
sections of the Dashboard screen.
Table 11-6. Dashboard: Total Threats, Threats (Counts), and Total Traffic (Bytes)
Information
Item Description (or Subfield and Description)
Total Threats
Emails Displays the total number of:
• Scanned e-mails.
• Viruses detected (to configure, see
Settings" on page
• E-mails that matched filters (to configure, see
• Spam (to configure, see
Web Displays the total number of:
• Files scanned.
• Malware detected (to configure, see
• Files blocked (to configure, see
• URLs blocked (to configure, see
IM/Peer to Peer Displays the total number of:
• Instant Messaging blocked (to configure, see
and Services" on page
• Peer to Peer blocked (to configure, see
Services" on page
Network Displays the total number of:
• IPS attack signatures matched (to configure, see
System" on page
• Port scans detected (to configure, see
page
11-16
6-5).
"Protecting Against E-mail Spam" on page
6-19).
6-19).
5-49).
5-49).
v1.0, January 2010
"Customizing E-mail Anti-Virus and Notification
"E-mail Content Filtering" on page
"Configuring Web Malware Scans" on page
"Configuring Web Content Filtering" on page
"Configuring Web URL Filtering" on page
"Customizing Web Protocol Scan Settings
"Customizing Web Protocol Scan Settings and
"Using the Intrusion Prevention
"Using the Intrusion Prevention System" on
Monitoring System Access and Performance
6-8).
6-11).
6-21).
6-23).
6-30).