NETGEAR UTM5EW-100NAS Appliance Reference Manual page 387

2. Click the IPSec VPN Connection Status submenu tab. The IPSec VPN Connection Status
screen displays.
Figure 11-14
The Active IPsec SAs table lists each active connection with the information that is described
in Table 11-12. The default poll interval is 5 seconds. To change the poll interval period, enter
a new value in the Poll Interval field, and then click Set interval. To stop polling, click Stop.
Table 11-12. IPsec VPN Connection Status Information
Item
Policy Name
Endpoint
Tx (KB)
Tx (Packets)
State
Action
To review the status of current SSL VPN tunnels:
1. Select Monitoring > Active Users & VPNs from the main menu. The Active Users & VPN
submenu tabs appear, with the Active Users screen in views
Monitoring System Access and Performance
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Description (or Subfield and Description)
The name of the VPN policy that is associated with this SA.
The IP address on the remote VPN endpoint.
The amount of data that is transmitted over this SA.
The number of IP packets that are transmitted over this SA.
The current status of the SA. Phase 1 is the authentication phase and Phase 2 is
key exchange phase. If there is no connection, the statu is IPsec SA Not
Established.
Click the Connect table button to build the connection or click the Disconnect
table button to terminate the connection.
v1.0, January 2010
11-25