NETGEAR UTM5EW-100NAS Appliance Reference Manual page 361

Table 10-3. System Date & Time Settings (continued)
Setting
Automatically Adjust for
Daylight Savings Time
NTP Server (default or
custom)
3. Click Apply to save your settings.
Note: If you select the default NTP servers or if you enter a custom server FQDN, the
UTM determines the IP address of the NTP server by performing a DNS lookup.
You must configure a DNS server address in the Network menu before the UTM
can perform this lookup.
Network and System Management
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Description (or Subfield and Description)
If daylight savings time is supported in your region, select the Automatically
Adjust for Daylight Savings Time checkbox.
From the pull-down menu, select an NTP server:
• Use Default NTP Servers. The UTM's RTC is updated regularly by
contacting a default Netgear NTP server on the Internet.
• Use Custom NTP Servers. The UTM's RTC is updated regularly by
contacting one of the two NTP servers (primary and backup), both of which
you must specify in the fields that become available with this menu
selection.
Note: If you select this option but leave either the Server 1 or Server 2 field
blank, both fields are set to the default Netgear NTP servers.
Note: A list of public NTP servers is available at
http://ntp.isc.org/bin/view/Servers/WebHome
Server 1 Name / IP Address Enter the IP address or host name the primary
Server 2 Name / IP Address Enter the IP address or host name the backup
v1.0, January 2010
.
NTP server.
NTP server.
10-25