NETGEAR UTM5EW-100NAS Appliance Reference Manual page 228

ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Table 7-5. Security Policy Editor: My Identity Settings (continued)
Setting
ID Type
Secure Interface
Configuration
Internet Interface
7. Click on the disk icon to save the configuration, or select File > Save from the Security Policy
Editor menu.
8. In the left frame, click Security Policy. The screen adjusts.
Figure 7-14
7-16
Description (or Subfield and Description)
From the pull-down menu, select Domain Name. Then, below, enter the
remote FQDN that you entered on the UTM's VPN Wizard screen (see
Figure 7-9 on page 7-10). In this example, the domain name is
utm_remote.com.
Leave the default setting, which is the Disabled selection from the Virtual
Adapter pull-down menu.
Leave the default setting, which is the Any selection from the Name pull-down
menu.
Virtual Private Networking Using IPsec Connections
v1.0, January 2010