Creating Gateway-To-Gateway Vpn Tunnels With The Wizard - NETGEAR UTM5EW-100NAS Appliance Reference Manual

ProSecure Unified Threat Management (UTM) Appliance Reference Manual

Creating Gateway-to-Gateway VPN Tunnels with the Wizard

Figure 7-3
To set up a gateway-to-gateway VPN tunnel using the VPN Wizard.
1. Select VPN > IPsec VPN from the menu. The IPsec VPN submenu tabs appear, with the IKE
Policies screen in view.
2. Click the VPN Wizard submenu tab. The VPN Wizard screen displays (see
page 7-5, which contains some examples for the dual-WAN port models). The WAN1 and
WAN2 radio buttons are shown on the VPN Wizard screen for the dual-WAN port models but
not on the VPN Wizard screen for the single-WAN port models.
7-4 Virtual Private Networking Using IPsec Connections
v1.0, January 2010
Figure 7-4 on