ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Figure 4-5
The Known PCs and Devices table lists the entries in the Network Database. For each PC or
device, the following fields are displayed:
•
Checkbox. Allows you to select the PC or device in the table.
•
Name. The name of the PC or device. For computers that do not support the NetBIOS
protocol, the name is displayed as "Unknown" (you can edit the entry manually to add a
meaningful name). If the PC or device was assigned an IP address by the DHCP server,
then the name is appended by an asterisk.
•
IP Address. The current IP address of the PC or device. For DHCP clients of the UTM,
this IP address does not change. If a PC or device is assigned a static IP address, you need
to update this entry manually after the IP address on the PC or device has changed.
•
MAC Address. The MAC address of the PC or device's network interface.
•
Group. Each PC or device can be assigned to a single LAN group. By default, a PC or
device is assigned to Group 1. You can select a different LAN group from the Group
pull-down menu in the Add Known PCs and Devices section or on the Edit Groups and
Hosts screen.
•
Action. The Edit table button that provides access to the Edit Groups and Hosts screen.
4-14
v1.0, January 2010
LAN Configuration