NETGEAR UTM5EW-100NAS Appliance Reference Manual page 257

.
Figure 7-26
4. Complete the fields, select the checkbox, and make your selections from the pull-down menus
as explained Table
Table 7-15. Add Mode Config Record Settings
Item
Client Pool
Record Name
First Pool
Second Pool
Third Pool
Virtual Private Networking Using IPsec Connections
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
7-15.
Description (or Subfield and Description)
A descriptive name of the Mode Config record for identification and
management purposes.
Assign at least one range of IP pool addresses in the First Pool fields to enable
the UTM to allocate these to remote VPN clients. The Second Pool and Third
Pool fields are options. To specify any client pool, enter the starting IP address
for the pool in the Starting IP field and enter the ending IP address for the pool in
the Ending IP field.
Note: Any IP pool should not be within the local network IP addresses. Use a
different range of private IP addresses such as 172.173.xxx.xx.
v1.0, January 2010
7-45