NETGEAR UTM5EW-100NAS Appliance Reference Manual page 49

Table 2-3. Setup Wizard Step 3: System Date and Time Settings
Setting
Set Time, Date and NTP Servers
Date/Time
Automatically Adjust for
Daylight Savings Time
NTP Server (default or
custom)
Using the Setup Wizard to Provision the UTM in Your Network
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Description (or Subfield and Description)
From the pull-down menu, select the local time zone in which the UTM operates.
The proper time zone is required in order for scheduling to work correctly. The
UTM includes a real-time clock (RTC), which it uses for scheduling.
If daylight savings time is supported in your region, select the Automatically
Adjust for Daylight Savings Time checkbox.
From the pull-down menu, select an NTP server:
• Use Default NTP Servers. The UTM's RTC is updated regularly by contacting a
default Netgear NTP server on the Internet.
• Use Custom NTP Servers. The UTM's RTC is updated regularly by contacting
one of the two NTP servers (primary and backup), both of which you must
specify in the fields that become available with this menu selection.
Note: If you select this option but leave either the Server 1 or Server 2 field
blank, both fields are set to the default Netgear NTP servers.
Note: A list of public NTP servers is available at
http://ntp.isc.org/bin/view/Servers/WebHome
Server 1 Name / Enter the IP address or host name the primary NTP server.
IP Address
Server 2 Name / Enter the IP address or host name the backup NTP server.
IP Address
v1.0, January 2010
.
2-15