NETGEAR UTM5EW-100NAS Appliance Reference Manual page 299

3. Select the checkbox and complete the fields as explained
Table 8-8.
Client IP Address Range
Item
Client IP Address Range
Enable Full Tunnel Support
DNS Suffix
Primary DNS Server
Secondary DNS Server
Client Address Range Begin The first IP address of the IP address range that you want to assign to
Client Address Range End
4. Click Apply to save your settings. VPN tunnel clients are now able to connect to the UTM and
receive a virtual IP address in the client address range.
Adding Routes for VPN Tunnel Clients
The VPN tunnel clients assume that the following networks are located across the VPN over SSL
tunnel:
• The subnet that contains the client IP address (that is, PPP interface), as determined by the
class of the address (Class A, B, or C).
• Subnets that are specified in the Configured Client Routes table on the SSL VPN Client
screen.
If the assigned client IP address range is in a different subnet than the local network, or if the local
network has multiple subnets, or if you select split mode tunnel operation, you must define client
routes.
Virtual Private Networking Using SSL Connections
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Settings
Description (or Subfield and Description)
Select this checkbox to enable full tunnel support. If you leave this
checkbox deselected (which is the default setting), split tunnel support is
enabled, and you must add client routes (see
Tunnel Clients" on page
Note: When full tunnel support is enabled, client routes are not operable.
A DNS suffix to be appended to incomplete DNS search strings. This is
an option.
The IP address of the primary DNS server that is assigned to the VPN
tunnel clients. This is an option.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This is an option.
the VPN tunnel clients.
The last IP address of the IP address range that you want to assign to
the VPN tunnel clients.
v1.0, January 2010
Table 8-8.
"Adding Routes for VPN
8-27).
8-27