NETGEAR UTM5EW-100NAS Appliance Reference Manual page 151

Note: This document assumes that you are familiar with QoS concepts such QoS
priority queues, IP Precedence, DHCP, and their values.
Table 5-7. QoS Profile Settings
Setting
Profile Name
Don't Change
Add DiffServ Mark Select the Add DiffServ Mark radio button to set the differentiated services
QoS Priority
5. Click Apply to save your settings. The new QoS profile is added to the List of QoS Profiles
table.
To edit a QoS profile:
1. In the List of QoS Profiles table, click the Edit table button to the right of the QoS profile that
you want to edit. The Edit QoS Profile screen displays.
2. Modify the settings that you wish to change (see
Firewall Protection
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Description (or Subfield and Description)
A descriptive name of the QoS profile for identification and management purposes.
Select the Don't Change radio button to ignore the QoS type (IP Precedence or
DHCP) and QoS value and to set only the QoS priority.
(DiffServ) mark in the Type of Service (ToS) byte of an IP header by specifying the
QoS type (IP Precedence or DHCP) and QoS value.
QoS (Type) From the QoS pull-down menu, select one of the following traffic
classification methods:
• IP Precedence. A legacy method that sets the priority in the ToS
byte of an IP header.
• DSCP. A method that sets the Differentiated Services Code Point
(DSCP) in the Differentiated Services (DS) field (which is the
same as the ToS byte) of an IP header.
QoS Value The QoS value in the ToS or Diffserv byte of an IP header. The QoS
value that you enter depends on your selection from the QoS pull-
down menu:
• For IP Precedence, select a value from 0 to 7.
• For DSCP, select a value from 0 to 63.
From the QoS Priority pull-down menu, select one of the following priority queues:
• Default.
• High.
• Medium High.
• Medium.
• Low.
v1.0, January 2010
Table 5-7).
5-37