NETGEAR UTM5EW-100NAS Appliance Reference Manual page 282

ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Table 8-4. SSL VPN Wizard Step 4:
Item
Client IP Address Range
Enable Full Tunnel Support
DNS Suffix
Primary DNS Server
Secondary DNS Server
Client Address Range Begin The first IP address of the IP address range that you want to assign to
Client Address Range End
Add Routes for VPN Tunnel Clients
Destination Network
Subnet Mask
8-10
Client IP Address Range and Routes
Description (or Subfield and Description)
Select this checkbox to enable full tunnel support. If you leave this
checkbox deselected (which is the default setting), split tunnel support is
enabled, and you must add a client route by completing the Destination
Network and Subnet Mask fields.
Note: When full tunnel support is enabled, client routes are not operable.
A DNS suffix to be appended to incomplete DNS search strings. This is
an option.
The IP address of the primary DNS server that is assigned to the VPN
tunnel clients. This is an option.
Note: If you do not assign a DNS server, the DNS settings remain
unchanged in the VPN client after a VPN tunnel has been established.
The IP address of the secondary DNS server that is assigned to the VPN
tunnel clients. This is an option.
the VPN tunnel clients.
The last IP address of the IP address range that you want to assign to
the VPN tunnel clients.
Leave this field blank or specify a destination network IP address of a
local network or subnet that has not yet been used.
Leave this field blank to specify the address of the appropriate subnet
mask.
Virtual Private Networking Using SSL Connections
v1.0, January 2010
Settings