NETGEAR UTM5EW-100NAS Appliance Reference Manual page 70

ProSecure Unified Threat Management (UTM) Appliance Reference Manual
6. Configure the Internet (IP) Address settings as explained in
Address link to see the currently assigned IP address.
Figure 3-6
Table 3-3. Internet (IP) Address Settings
Setting Description (or Subfield and Description)
Get Dynamically If your ISP has not assigned you a static IP address, select the Get dynamically
from ISP from ISP radio button. The ISP automatically assigns an IP address to the UTM
using DHCP network protocol.
Use Static IP If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Address Static IP Address radio button and enter the following settings:
IP Address
Subnet Mask
Gateway IP Address
7. Configure the Domain Name Server (DNS) servers settings as explained in
page 3-9.
Figure 3-7
3-8
Static IP address assigned to you. This address identifies the
UTM to your ISP.
The subnet mask is usually provided by your ISP.
The IP address of the ISP's gateway is usually provided by
your ISP.
Manually Configuring Internet and WAN Settings
v1.0, January 2010
Table 3-3. Click the Current IP
Table 3-4 on