Managing Ca Certificates - NETGEAR UTM5EW-100NAS Appliance Reference Manual

The Certificates screen contains four tables that are explained in detail in the following sections:
• Trusted Certificates (CA Certificate) table. Contains the trusted digital certificates that were
issued by CAs and that you uploaded (see
• Active Self Certificates table. Contains the digital self certificates that were issued by CAs
and that you uploaded (see
• Self Certificate Requests table. Contains the self certificate requests that you generated.
These request may or may not have been submitted to CAs, and CAs may or may not have
issued digital certificates for these requests. Only the digital self certificates in the Active Self
Certificates table are active on the UTM (see
• Certificate Revocation Lists (CRL) table. Contains the lists with digital certificates that
have been revoked and are no longer valid, that were issued by CAs, and that you uploaded.
Note, however, that the table displays only the active CAs and their critical release dates. (see
"Managing the Certificate Revocation List" on page

Managing CA Certificates

To view and upload trusted certificates:
Select VPN > Certificates from the menu. The Certificates screen displays.
top section of the screen with the trusted certificate information and some example certificates in
the Trusted Certificates (CA Certificates) table.
Figure 9-11 [Certificates, screen 1 of 3]
Managing Users, Authentication, and Certificates
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
"Managing Self Certificates" on page
v1.0, January 2010
"Managing CA Certificates" on this page).
"Managing Self Certificates" on page
9-25).
9-20).
9-20).
Figure 9-11 shows the
9-19