Connect the Network Cables
Using the unshielded twisted pair (UTP) cables that are supplied, connect any
port on the hub to the port on a network card in each PC.
Note: Set the Normal/Uplink push button on the Model EN104
to Normal when connecting port 4 on the hub to either a PC or the
network card.
PC with network
card installed
Hub
Category 5 10/100 Mbps UTP cables*
*Use the cables provided or any Category 5 UTP cable.
Maximum length = 100 meters (300 feet)
Model SB104 10 Mbps Network Starter Kit Installation Guide
Power adapter
PC with network
card installed
RJ-45
RJ-45
connector
connector
TP
hub
Printer
(optional)
7995FB