Cabling And Computer Hardware Requirements; Computer Network Configuration Requirements; Internet Configuration Requirements - NETGEAR UTM5EW-100NAS Appliance Reference Manual

• You can choose a variety of WAN options if the factory default settings are not suitable for
your installation. These options include enabling a WAN port to respond to a ping, and
setting MTU size, port speed, and upload bandwidth.
4. Prepare to physically connect the firewall to your cable or DSL modems and a computer.
Instructions for connecting the UTM are in the ProSecure Unified Threat Management UTM
Installation Guide.

Cabling and Computer Hardware Requirements

To use the UTM in your network, each computer must have an Ethernet Network Interface Card
(NIC) installed and must be equipped with an Ethernet cable. If the computer will connect to your
network at 100 Mbps or higher speeds, you must use a Category 5 (CAT5) cable.

Computer Network Configuration Requirements

The UTM integrates a Web Management Interface. To access the configuration menus on the
UTM, your must use a Java-enabled Web browser that supports HTTP uploads such as Microsoft
Internet Explorer 6 or higher, Mozilla Firefox 3 or higher, or Apple Safari 3 or higher with
JavaScript, cookies, and you must have SSL enabled. Free browsers are readily available for
Windows, Macintosh, or UNIX/Linux.
For the initial connection to the Internet and configuration of the UTM, you must connect a
computer to the UTM, and the computer must be configured to automatically get its TCP/IP
configuration from the UTM via DHCP.
Note: For help with the DHCP configuration, see the
document that you can access from the link in
The cable or DSL modem broadband access device must provide a standard 10 Mbps (10BASE-T)
Ethernet interface.

Internet Configuration Requirements

Depending on how your ISPs set up your Internet accounts, you will need the following Internet
configuration information to connect UTM to the Internet:
• Host and domain names
• One or more ISP login names and passwords
Network Planning for Dual WAN Ports (Dual-WAN Port Models Only)
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
v1.0, January 2010
"TCP/IP Networking
Appendix E, "Related
Basics"
Documents."
B-3