NETGEAR UTM5EW-100NAS Appliance Reference Manual page 323

Note: For security reasons, the Deny Login from WAN Interface checkbox is selected
by default for guests and administrators. The Disable Login checkbox is
disabled (masked out) for administrators.
4. Click Apply to save your settings.
Configuring Login Restrictions Based on IP Address
To restrict logging in based on IP address:
1. Select Users > Users from the menu. The Users screen displays (see
2. In the Action column of the List of Users table, click the Policies table button for the user for
which you want to set login policies. The Policies submenu tabs appear, with the Login
Policies screen in view.
3. Click the by Source IP Address submenu tab. The by Source IP Address screen displays.
Figure 9-8 shows an IP address in the Defined Addresses table as an example.
Figure 9-8
Managing Users, Authentication, and Certificates
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
v1.0, January 2010
Figure 9-5 on page 9-10).
9-13