NETGEAR UTM5EW-100NAS Appliance Reference Manual page 47

Table 2-2. Setup Wizard Step 2: WAN Settings (continued)
Setting
Austria (PPTP)
(continued)
Other (PPPoE)
Internet (IP) Address
Click the Current IP Address link to see the currently assigned IP address.
Get Dynamically from
ISP
Use Static IP Address
Domain Name Server (DNS) Servers
Get Automatically from
ISP
Using the Setup Wizard to Provision the UTM in Your Network
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Description (or Subfield and Description)
Idle Timeout
My IP Address
Server IP Address
If you have installed login software such as WinPoET or Enternet, then your
connection type is PPPoE. Select this radio button and enter the following settings:
Account Name
Domain Name
Idle Timeout
If your ISP has not assigned you a static IP address, select the Get dynamically
from ISP radio button. The ISP automatically assigns an IP address to the UTM
using DHCP network protocol.
If your ISP has assigned you a fixed (static or permanent) IP address, select the
Use Static IP Address radio button and enter the following settings:
IP Address
Subnet Mask
Gateway IP Address
If your ISP has not assigned any Domain Name Servers (DNS) addresses, select
the Get Automatically from ISP radio button.
v1.0, January 2010
Select the Keep Connected radio button to keep the
connection always on. To log out after the connection is
idle for a period of time, select the Idle Time radio button
and, in the timeout field, enter the number of minutes to
wait before disconnecting. This is useful if your ISP
charges you based on the period that you have logged in.
The IP address assigned by the ISP to make the
connection with the ISP server.
The IP address of the PPTP server.
The valid account name for the PPPoE connection.
The name of your ISP's domain or your domain name if
your ISP has assigned one. You may leave this field blank.
Select the Keep Connected radio button to keep the
connection always on. To log out after the connection is
idle for a period of time, select the Idle Time radio button
and, in the timeout field, enter the number of minutes to
wait before disconnecting. This is useful if your ISP
charges you based on the period that you have logged in
Static IP address assigned to you. This address identifies
the UTM to your ISP.
The subnet mask is usually provided by your ISP.
The IP address of the ISP's gateway is usually provided by
your ISP.
2-13