Table 11-10. System Status: WAN Configuration and LAN Port Information
Setting
Description (or Subfield and Description)
WAN1 Configuration/WAN2 Configuration (Dual-WAN Port Models)
or
WAN Configuration (Single-WAN Port Models)
WAN Mode
Single Port, Load Balancing, or Auto Rollover.
WAN State
UP or DOWN.
NAT
Enabled or Disabled.
Connection Type
Static IP, DHCP, PPPoE, or PPTP.
Connection State
Connected or Not Connected.
IP Address
Subnet Mask
Gateway
These fields are self-explanatory.
Primary DNS
Secondary DNS
MAC Address
LAN Port
MAC Address
These fields are self-explanatory.
IP Address
DHCP
DHCP or None.
IP Subnet Mask
This field is self-explanatory.
Figure 11-12 [System Status, screen 3 of 3]
Table 11-11 on page 11-24
Monitoring System Access and Performance
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
explains the Interface Statistics section of the System Status screen.
v1.0, January 2010
11-23