Connect To An Existing Wifi Network - NETGEAR EX6150 AC1200 Quick Start Manual

Connect to an Existing WiFi Network

To extend the range of your WiFi network, you must connect the extender
to your existing WiFi network. You can do this in one of two ways:
• Connect with WPS. For more information, see
page 6.
• Connect with web browser setup. For more information, see
Connect with Web Browser Setup
Connect with WPS
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without
typing the network name and password.
Note: WPS does not support WEP network security. If you are using WEP
security, follow the instructions in
.
page 8
1. Press the WPS button on the side panel of the extender.
The WPS LED
2. Within two minutes, press the WPS button on your router or access
point.
The WPS LED on the extender lights solid green, the Router Link LED
lights, and the extender connects to your existing WiFi network.
on page 8
Connect with Web Browser Setup
blinks.
6
Connect with WPS
.
on
on