NETGEAR UTM5EW-100NAS Appliance Reference Manual page 259

5. Click Apply to save your settings. The new Mode Config record is added to the List of Mode
Config Records table.
Continue the Mode Config configuration procedure by configuring an IKE policy.
6. Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs appear with the IKE
Policies screen in view (see
7. Under the List of IKE Policies table, click the Add table button. The Add IKE Policy screen
displays. (Figure 7-27
WAN1 and WAN2 radio buttons (next to Select Local Gateway) are shown on the Add IKE
Policy screen for the dual-WAN port models but not on the Add IKE Policy screen for the
single-WAN port models.
Figure 7-27
Virtual Private Networking Using IPsec Connections
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Figure 7-20 on page
shows the upper part only of a dual-WAN port model screen.) The
v1.0, January 2010
7-24).
7-47