NETGEAR UTM5EW-100NAS Appliance Reference Manual page 220

ProSecure Unified Threat Management (UTM) Appliance Reference Manual
4. Click Apply to save your settings. The IPsec VPN policy is now added to the List of VPN
Policies table on the VPN Policies screen. By default, the VPN policy is enabled.
Figure 7-6
5. Configure a VPN policy on the remote gateway that allows connection to the UTM.
6. Activate the IPsec VPN connection:
a. Select Monitoring > Active Users & VPNs from the menu. The Active Users & VPNs
submenu tabs appear, with the Active Users screen in view.
b. Click the IPSec VPN Connection Status submenu tab. The IPSec VPN Connection
Status screen displays.
Figure 7-7
c. Locate the policy in the table, and click the Connect table button. The IPsec VPN
connection should become active.
7-8 Virtual Private Networking Using IPsec Connections
v1.0, January 2010