Configuring Pim For Ipv4 And Ipv6 (Web); Pim Global Configuration - Dell PowerConnect 7048P Manual

Configuring PIM for IPv4 and IPv6 (Web)

This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring PIM-SM and PIM-DM
for IPv4 and IPv6 multicast routing on a PowerConnect 7000 Series switch.
For details about the fields on a page, click
NOTE:
The OpenManage Switch Administrator pages to configure IPv4 multicast
routing and IPv6 multicast routing is very similar. The figures in this section show
the IPv4 multicast configuration pages. To configure IPv6 multicast with PIM, use
the pages available from the IPv6 Multicast → PIM menu.

PIM Global Configuration

Use the Global Configuration page to configure the administrative status of
PIM-DM or PIM-SM on the switch.
To display the page, click IPv4 Multicast → PIM → Global Configuration or
IPv6 Multicast → PIM → Global Configuration in the navigation panel.
Figure 42-28. PIM-DM Global Configuration
1176
Managing IPv4 and IPv6 Multicast
at the top of the page.