Dell PowerConnect 7048P Manual page 1184

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

Figure 42-36. Add Static RP

3 Enter the IP address of the RP for the group range.

4 Enter the group address of the RP.

5 Enter the group mask of the RP.

6 Check the Override option to configure the static RP to override the

dynamic (candidate) RPs learned for same group ranges.

7 Click Apply.

The new Static RP is added, and the device is updated.

Managing IPv4 and IPv6 Multicast