Hot-Plug Power Supply Cover Plate - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual
For use with pentium ii xeon and pentium iii xeon processor-based servers only
Hide thumbs
Also See for 5500R - ProLiant - 256 MB RAM:
- Setup and installation manual (169 pages) ,
- Integration notes (29 pages) ,
- Configuration manual (9 pages)
Table of Contents
Advertisement
2-40 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
Hot-Plug Power Supply Cover Plate
To remove the power supply cover plate:
1. Remove the two T-15 screws securing the power supply cover plate to the chassis.
2. Pull the hot-plug power supply cover plate away from the chassis.
Figure 2-33. Removing the hot-plug power supply cover plate
Reverse steps 1 through 2 to replace a hot-plug power supply cover plate.
CAUTION: A power supply cover plate must be present in bays not containing power supplies
to maintain proper cooling of the drive bays.
For use with Pentium II and Pentium III Xeon processor-based servers only
Advertisement
Table of Contents
