Server Warnings And Precautions - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual

Server Warnings and Precautions

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.
43 kg
95 lb
WARNING: To reduce the risk of electric shock or damage to the equipment:
I
I
I
WARNING: Protect the server from power fluctuations and temporary interruptions with a
regulating uninterruptible power supply (UPS). This device protects the hardware from damage
caused by power surges and voltage spikes and keeps the system in operation during a power
failure.
CAUTION: The ProLiant 5500 and 5500R server must always be operated with the system unit
cover on. Proper cooling will not be achieved if the system unit cover is removed.
WARNING: To reduce the risk of personal injury or damage to the equipment:
Observe local Occupational Safety requirements and guidelines for heavy
I
equipment handling.
Obtain adequate assistance to lift and stabilize the product during installation or
I
removal.
Remove all pluggable power supplies and modules to reduce the weight of the
I
product.
The product will be unstable when not mated with the rails.
I
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect power from the server by unplugging the power cord from either the electrical
outlet or the server.
For use with Pentium II and Pentium III Xeon processor-based servers only
Removal and Replacement Procedures 2-5