6000 - 6099, Compaq Network Interface Controller Boards Test Error Codes - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual

3-32 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
6000 – 6099, Compaq Network Interface Controller Boards
Test Error Codes
The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed
NetFlex-2/Token Ring Controllers.
Error Code
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
6090-xx
6091-xx
6092-xx
Compaq Network Interface Boards
Test Error Codes
Description
Network card ID failed.
Network card setup failed.
Network card transmit failed.
Network card configuration failed.
Network card reset failed.
Network card internal failed.
Network card external failed.
Network card open failed.
Network card initialization failed.
Network card internal loopback failed.
Network card external loopback failed.
For use with Pentium II and Pentium III Xeon processor-based servers only
Table 3-15
Recommended Action
1. Check the controller installation in the EISA
slot.
2. Check the interrupt type and number
setting.
3. Check the media connection at the
controller and Multistation Access Unit
(MAU).
4. Check the media speed (4/16 ) and type
Unshielded Twisted Pair/Shielded Twisted
Pair (UTP/STP) settings.
5. Check the MAU, cabling, or other network
components.
6. Replace the controller.